View AXLE10S_4155829.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Issue: 02 Date: 2005-05-22 Specification AXLE10S Oscillator type : TCXO with Stratum III stability incl. holdover
Parameter
Frequency range Standard frequencies Frequency stability Initial tolerance vs. temperature in operating temperature range (steady state) * see Note 3 vs. supply voltage variation vs. load change 24 hours drift 24 hours holdover in operating temperature range and VS 5 % long term (aging) over 15 years Long term overall stability2 15 years Frequency adjustment range Electronic Frequency Control (EFC) RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Start-up time Supply voltage VS Current consumption (steady state) Enable/disable function Operable temperature range Storage temperature range Enclosure (see drawing) Weight Packing ESD Sensitivity
min.
typ.
max.
Unit
MHz MHz ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm
Condition
1.25 20 1.544 / 12.800 / 16.384 / 19.440 / 20.000 0.8 Frequency stability 0.28 0.28* 0.5 0.3 0.1 0.04 0.37 3 4.6 N.A. HCMOS 15
@+25C Temperature Option I 0~+50C "528" 0~+70C "728" * 0~+70C "750" VS 5 % RL 10 % GR-1244-CORE Not for option I = "750" @ +40C See Note 2 N.A.
pF 5 ns 45 55 % 10 ms 4.75 5.0 5.25 V 3.13 3.3 3.47 V 10 mA 20 mA Pin 2 = HIGH or OPEN: Output Enable Pin 2 = LOW: Output High Z -20 +70 C -40 +85 C 15.1x9.5x6.0 max mm 3 gram Tape & reel 1500 V
@ VS/2 @ VS - 5% Option II ="50" Option II ="33" Option II ="50" Option II ="33"
IEC 61837 CO 27 IEC 60286-3 HBM as in IEC 61000-42
Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated 2. Overall frequency stability = initial tolerance + temp.stability + supply & load change + aging 3. *Option I = "728" only available for frequencies 12.8 MHz and 19.44 MHz
Ordering Code:
Model (Specification) AXLE10S Option I 528 Option II Frequency [MHz] 33 12.800
GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany
AXLE10S page 1(2)
www.axtal.com fon: +49 (6261) 930834 fax: +49 (6261) 939836 E-mail: info@axtal.com
Enclosure drawing
Pin connections
Pin # Symbol 1 N.C. 2 E/D 3 GND 4 RF OUT 5 N.C. 6 Vs Function No Connection Enable/Disable Input Ground RF Output No Connection Supply Voltage
Note: Length max 15.1 mm, Height max. 6.0 mm
Environmental conditions
Test Visual inspection, dimensions Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* Bump* Free fall* IEC 60068 Part ... IEC 60679-1 clause ... 4.3 4.6.2 4.6.3 Test conditions Enclosure styles as in IEC 60679-3 or 61837, if applicable Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 5)C Method 1 Test Tb Method 1A, 5s Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Eb, 4000 bumps per Axes, 40g, 6 ms Test Ed procedure 1, 2 drops from 1m height Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Na, 10 cycles at extremes of operating temperature range Test Ba, 16 h at upper temperature indicated by climatic category Test Db variant 1 severity b), 55C/95% r.H., 6 cycles Test Aa, 2 h at lower temperature indicated by climatic category Sequence of 4.6.14, 4.6.15 (1st cycle), 4.6.16, 4.6.15 (5 cycles) Test Ca, 56 days
2-17 2-20 2-58 2-27 2-29 2-32
4.6.8 4.6.6 4.6.9 4.6.7
Vibration, sinusoidal* 2-6
Rapid change of temperature Dry heat Damp heat, cyclic* Cold Climatic sequence* Damp heat, steady state* Endurance tests - ageing - extended aging
2-14 2-2 2-30 2-1 1-7 2-3
4.6.5 4.6.14 4.6.15 4.6.16 4.6.17 4.6.18
4.7.1 4.7.2
30 days @ 85C, OCXO @25C 1000h, 2000h, 8000h @85C
GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany
AXLE10S page 2(2)
www.axtal.com fon: +49 (6261) 930834 fax: +49 (6261) 939836 E-mail: info@axtal.com

▲Up To Search▲

Price & Availability of AXLE10S

	To Download AXLE10S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .